Here is my bottle drier,shown is a 1.5 inch spade bit and 1/4 inch quarter round router bit.Material used is 5/8 inch particleboard cut at 18 inches by 12 inches.Layout for holes are as follows,1 7/8 inch from edges and 2 3/4 inch in between.All hole layouts are from center to center of holes.Sides or raisers are 3 1/4 inches tall and 18 inches long.You could layout the top board and stack the rest and drill all at the same time.I used the 1/4 inch router bit to soften the edges but not necessary.I then glued and stapled the raiser in place but they could be nailed or screwed.Very easy and fast to make.Work safely and wear your PPE.
Attachments
imag0227i (2).jpg (92 downloads)
Edited by Strange Brew (01/08/12 07:07 AM)
_________________________
Fermenting-
Fermenting-
Carbonating-
Carbonating-Bavarian Wheat 2.5 Gal. DME True Brew India Pale Ale
Drinking-Irish stout (not so yucky)
Beere is made of malte, of hoppes, and water; it is a naturall drynke for a doche [Dutch] man, and nowe of late dayes [recently] it is moche vsed in Englande to the detryment of many Englysshe men … for the drynke is a colde drynke. Yet it doth make a man fatte, and doth inflate the bely, as it doth appere by the doche mennes faces and belyes.
Previous Topic
Index
.jpg){kind=link}